Switches & Nodes

The GigaCore 10t-IP is an up to 10 Gigabit Ethernet switch for professional touring applications.
IP65-Rated for reliable outdoor use.
Designed to support the most advanced AV protocols out of the box and is the backbone for a converged network, allowing multiple applications to co-exist on the same network.
Configuration and Status report via NFC compatible smart device and Araneo App.

The 10 Gb AV Network Switch is designed for installation, integration, and touring applications in lighting, audio, and video.
The GigaCore 30i supports the most advanced AV protocols and serves as the backbone for a converged network, enabling multiple applications to coexist seamlessly.
It features six 10Gb SFP+ ports for copper or fibre connections, along with 24 copper 1Gb ports.
With a total PoE budget of up to 1000W and PoE++ available on every copper port, this GigaCore switch can power almost any IP PTZ camera or active loudspeaker.

10Gb Network switch for converged AV networks.
The GigaCore 20t is an Ethernet switch, with bandwidths up to 10Gb, for professional touring applications in lighting, audio and video with a frequent tear-down & built-up requirement or for any other application where ruggedized connectivity is necessary.
It is designed to support the most advanced AV protocols out of the box and is the backbone for a converged network, allowing multiple applications to co-exist on the same network.

Easy set-up switch with intuitive web interface.
Tailored for AV industry.
Aggregate several Inter-Switch Links (ISL) into one virtual link to increase bandwidth between switches.
Deliver up to 130W over Ethernet to power up fixtures, nodes, cameras, intercom systems and other devices.

An easy to deploy and maintain ethernet/DMX processing device for converting, routing and merging DMX/RDM data on a network.
All relevant industry standard protocols such as Art-Net, sACN, KiNET, RTTRpl (Blacktrax) are supported and can be processed and converted by the 16 onboard process engines supporting HTP, LTP, Crossfade, Backup, Switch and Custom merging modes with soft patch functionality.

The ideal Ethernet/DMX processing device for touring, mounted in the truss or in a rack.
Equipped with 2x 1Gb Ethercon ports and 4x 5-pin DMX ports LumiNode 4 offers flexibility in a half 19″ package.
Each DMX port is fully optically and galvanically isolated and can be configured as an in- or output.

The Ethernet-DMX8 MkII is an Ethernet node that serves 8 x DMX512 outlets, compatible with the following protocols: DMX512, DMX512-A, RDM (ANSI E1.20), sACN (ANSI E1.31) and Art-NetTM.
All 8 outlets can be used as input or output. The Ethernet links are 100BaseTx connections on shielded Neutrik RJ45 Ethercon connectors.
All configuration can be done over Ethernet through a built in website, or the front panel display.